Exposed Copper Assembly Complete Shower Set
Lead time approx. 2-5 working days + transit, Shipped Australia wide for a low flat rate!
Everything you need to install a beautiful copper and brass shower for your home, all in one box! With a high water efficiency rating, beautiful exposed natural copper piping and quality brass fittings. Created by Eco Sustainable House, this convenient package has been prepared by our own team to have all the components ready for installation by a registered plumber.
Description
Whether you're looking to add an outdoor shower, or create that industrial chic look for your main bathroom, our E.S.H shower is your best option, and at a price that far outshines the competition!
Each shower includes an Australian-made brass shower head, garden-style valve handles and pre-bent piping for a rounded edge arc, or pre-cut sections for the square-edge model. This means less time running around for individual parts, and more time enjoying your brand-new shower.
We didn't skip the minor details either; the clips are polished solid brass to match the aesthetics of your exposed copper shower.
**Note: Some lifestyle images show old shower head and pipe clips**
Click here if you are interested in copper showerhead options.
The actual Shower Head pictured below (200mm WELS-Rated PVD Brass Shower Head)
Common Product Add-ons
1. The Foot wash - This is simply a garden tap with fittings to install. Should be added to Ground Feed models only. CLICK HERE to add.
Specifications
- WEIGHT: ~4 kg
- DIMENSIONS: Height – 1270mm (inc. taps) Reach – 470mm (not inc. rose diameter) 2200mm for Ground fed (Can be shortened by plumber)
- MATERIALS: Brass, Stainless Steel & Copper
- OVERALL HEIGHT: (measured from mounting point to the highest of pipe) 1270mm (single tap models are slightly shorter)
- SHOWER HEAD REACH: 570mm (to outer edge)
- CONNECTION SIZE: 1/2 inch (20mm pipe)
- DISTANCE BETWEEN TAP CENTRES: 205mm (1-meter rough-in height recommended)
- WALL TO PIPE CLIP CENTRE: 40mm
- FLOW RATE: Nominal Flow Rate (8.26 L/M)
- WELS RATED 3-Star
- WORKING PRESSURE (GATE VALVES): PN20 / 2000 kPa
*Note measurements can vary as copper pipe is bent & cut by hand
Parts Included
- Brass elbow for wall connection / Copper tails for ground feed
- Copper T-junction (dual tap only)
- Copper 90° Elbows (extra for square-edge model)
- Gate valves & tap handles
- Connectors between copper pipe & components
- Brass shower head
- Mounting brackets
- Copper pipe pre-cut and bent
*Supplied unassembled in box, must be installed by qualified plumber
Disclaimer: all measurements are guide only, as depends on final installation and style of shower chosen. Slight variation may occur. Additional components, fixings and tools may be needed to commission the system.
For more information please contact our team at Eco Sustainable House, and we'll be happy to assist.
Find out more:
FAQs
What is the difference between this shower and the Burleigh shower?
The Kirra Copper Wall Mounted Shower comes with a brass shower head and brass clips to attach the pipe. The Burleigh has a genuine copper shower head made in Australia and copper coloured pipe clips.
Can I add a footwash tap?
If ordering a ground feed model, yes, you can order a foot wash tap. Link in the description above. If you are using a wall feed, your plumber can supply a basic garden tap and plumb that into the wall nearby.
What is the water point connection?
For wall feed models, a 15mm male thread is required. For ground feed models the connection is directly to the copper pipe tails (3/4 inch (20mm) pipe). The installing plumber will need to supply these parts themselves.
Can I use this shower indoors?
Of course! The only difference is that your copper and brass components will remain shiny for longer. Australian WELS ratings apply to indoors and outdoors just the same.
